RM3090E _59 Vehicle Exterior _008792 WINDOW / GLASS _0050078 POWER WINDOW REGULATOR MOTOR(for Front Door) G

WINDOW / GLASS POWER WINDOW REGULATOR MOTOR(for Front Door) INSPECTION

PROCEDURE

Hide Display 85720C 1.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

w/ Jam Protection Function:

1,1.25 1,0.333 1,0.333 1.167,0.333 true 2.188,1.417 2.5,0.917 false 3.167,1.417 2.833,0.917 false 2.25,0.563 2.5,0.563 false 2.813,0.563 3.146,0.844 false 1.24,0.26 1.552,0.458 0.313,0.198 10 false *1 0.063,0.052 0.375,0.25 0.313,0.198 10 false *a 2.125,0.49 2.281,0.688 0.156,0.198 10 false B 3.052,0.854 3.375,1.052 0.323,0.198 10 false GND 2.083,1.448 2.406,1.646 0.323,0.198 10 false UP 2.906,1.458 3.406,1.656 0.5,0.198 10 false DOWN

GND

DOWN

*1	Motor Gear
*a	Component without harness connected (Power Window Regulator Motor Assembly LH)
	Clockwise
	Counterclockwise

Apply positive (+) battery voltage to the connector terminal 2 (B).

ii.

Apply negative (-) battery voltage to the connector terminals 1 (GND) and 7 (DOWN) / 10 (UP).

NOTICE:: ·

Do not apply voltage to any terminals except terminals 1 and 2, to avoid damaging the pulse sensor inside the motor.; ·

Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly to the door.

iii.

Check that the motor gear rotates smoothly as follows.

OK:

Measurement Condition	Specified Condition
Battery positive (+) → 2 (B) Battery negative (-): 1 (GND) (3 seconds or more) → 1 (GND) and 10 (UP) (within 1 second) → 1 (GND) (within 1 second) → 1 (GND) and 10 (UP)	Motor gear rotates clockwise (UP)
Battery positive (+) → 2 (B) Battery negative (-): 1 (GND) (3 seconds or more) → 1 (GND) and 7 (DOWN) (within 1 second) → 1 (GND) (within 1 second) → 1 (GND) and 7 (DOWN)	Motor gear rotates counterclockwise (DOWN)

w/o Jam Protection Function:

1.01,1.281 1,0.25 1,0.25 1.25,0.25 true 2.167,0.75 2.417,0.75 true 2.917,0.75 3.167,0.75 true 1.292,0.177 1.604,0.333 0.313,0.156 10 *1 0.052,0.052 0.365,0.208 0.313,0.156 10 *a 2.031,0.677 2.188,0.875 0.156,0.198 10 U 3.208,0.667 3.365,0.865 0.156,0.198 10 D

*1	Motor Gear
*a	Component without harness connected (Power Window Regulator Motor Assembly LH)
	Clockwise
	Counterclockwise

Apply battery voltage to connector terminals 1 (D) and 2 (U).

NOTICE:: Do not apply battery voltage to any terminals except terminals 1 (D) and 2 (U).

Check that the motor gear rotates smoothly as follows.

OK:

Measurement Condition	Specified Condition
Battery positive (+) → 2 (U) Battery negative (-) → 1 (D)	Motor gear rotates clockwise
Battery positive (+) → 1 (D) Battery negative (-) → 2 (U)	Motor gear rotates counterclockwise

If the result is not as specified, replace the power window regulator motor assembly LH.

Hide Display 85710D 2.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

w/ Jam Protection Function:

0.729,0.813 0.729,0.177 0.729,0.177 1.031,0.177 true 2.563,0.375 2.063,0.375 true 2.875,0.365 3.198,0.646 true 2.51,0.719 2.271,1.406 true 2.896,0.729 3.125,1.396 true 0.073,0.031 0.385,0.229 0.313,0.198 10 false *a 1.073,0.115 1.385,0.313 0.313,0.198 10 false *1 3.094,0.656 3.396,0.802 0.302,0.146 10 false GND 2.938,1.448 3.385,1.615 0.448,0.167 10 false DOWN 2.156,1.427 2.375,1.604 0.219,0.177 10 false UP 1.958,0.302 2.115,0.458 0.156,0.156 10 false B

GND

DOWN

*1	Motor Gear
*a	Component without harness connected (Power Window Regulator Motor Assembly LH)
	Clockwise
	Counterclockwise

Apply positive (+) battery voltage to the connector terminal 2 (B).

ii.

Apply negative (-) battery voltage to the connector terminals 1 (GND) and 7 (DOWN) / 10 (UP).

NOTICE:: ·

Do not apply voltage to any terminals except terminals 1 and 2, to avoid damaging the pulse sensor inside the motor.; ·

Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly to the door.

iii.

Check that the motor gear rotates smoothly as follows.

OK:

Measurement Condition	Specified Condition
Battery positive (+) → 2 (B) Battery negative (-): 1 (GND) (3 seconds or more) → 1 (GND) and 10 (UP) (within 1 second) → 1 (GND) (within 1 second) → 1 (GND) and 10 (UP)	Motor gear rotates clockwise (UP)
Battery positive (+) → 2 (B) Battery negative (-): 1 (GND) (3 seconds or more) → 1 (GND) and 7 (DOWN) (within 1 second) → 1 (GND) (within 1 second) → 1 (GND) and 7 (DOWN)	Motor gear rotates counterclockwise (DOWN)

w/o Jam Protection Function:

2.292,0.51 2.542,0.677 true 3.229,0.5 3,0.677 true 0.833,0.917 0.833,0.25 0.833,0.25 1,0.25 false 1.063,0.177 1.375,0.333 0.313,0.156 10 *1 0.052,0.021 0.365,0.177 0.313,0.156 10 *a 2.167,0.417 2.479,0.573 0.313,0.156 10 U 3.271,0.406 3.396,0.552 0.125,0.146 10 D

*1	Motor Gear
*a	Component without harness connected (Power Window Regulator Motor Assembly RH)
	Clockwise
	Counterclockwise

Apply battery voltage to connector terminals 1 (D) and 2 (U).

NOTICE:: Do not apply battery voltage to any terminals except terminals 1 (D) and 2 (U).

ii.

Check that the motor gear rotates smoothly as follows

OK:

Measurement Condition	Specified Condition
Battery positive (+) → 1 (D) Battery negative (-) → 2 (U)	Motor gear rotates clockwise
Battery positive (+) → 2 (U) Battery negative (-) → 1 (D)	Motor gear rotates counterclockwise

If the result is not as specified, replace the power window regulator motor assembly RH.

FaceBox